3M 11KV 3C*95SQMM INDOOR TERMINATION KIT

3M 11KV 3C*95SQMM INDOOR TERMINATION KIT Specification

Material
PVC

Application
Industrial

Surface Treatment
Coated

Design
Plain

Phase
Single

Frequency
50-60 Hertz (HZ)

Color
Red & Black

3M 11KV 3C*95SQMM INDOOR TERMINATION KIT Trade Information

Minimum Order Quantity
1 Piece

Payment Terms
Cash in Advance (CID)

Supply Ability
500 Pieces Per Month

Delivery Time
1 Days

Main Domestic Market
All India

About 3M 11KV 3C*95SQMM INDOOR TERMINATION KIT

3M 11 kV, 3-core 95 sq mm indoor termination kit, based on 3Ms product families (e.g. QT-II / QT-III / 92-EB series) and general medium-voltage termination practices. (For exact numbers, always refer to the specific datasheet / part number.)

General Purpose & Application

To terminate 3-core polymeric insulated medium voltage cables (XLPE, EPR etc.) of cross-section 95 sq mm (or in a size range including 95 sq mm) for use in indoor environments (switchgear rooms, cable chambers, indoor cable boxes).
Provides insulation, stress control, shielding termination, sealing (moisture / air ingress), and mechanical support between the cable and the termination point (like lugs, busbars, connectors).
Cold-shrink / silicone rubber style: installation does not require heat / torch body is pre-stretched and shrinks when the internal core is removed, providing tight conformal fit.

Typical Kit Components

A 95 sq mm kit would normally include:

Silicone rubber termination body / main tube (pre-stretched, cold-shrinkable) including built-in stress control inserts (Hi-K sleeves / tubes)
Phase re-jacketing sleeves (to cover insulation ends trimmed during preparation)
Breakout / trifurcation boots (to separate the three cores downstream of the termination body)
Sealing compounds / mastic / silicone grease to fill voids, seal interfaces, and prevent moisture ingress
Constant force springs / bonding springs to ensure continuity of the cables metallic screen / shield to ground
Copper ground braid / shield braid to connect the cable shield to the termination / earth
Shielding / EMI copper foil tapes (for connecting screening layers)
Re-jacket (outer) sleeves / tubes (to restore jacket where trimmed)
Cleaning wipes, masking tape, installation tools, instructions

Typical Electrical / Mechanical & Performance Characteristics

Here are representative or expected parameters for such kits:

Parameter / Feature	Typical Specification / Description
Voltage class	11 kV (some designations might be 12 kV class)
Cable cross-section	Nominal 95 sq mm (kit likely supports a size range around this, e.g. 70120 sq mm or similar)
Insulation outer diameter (OD) range	The kit must be compatible with the actual insulation + screen diameter of the cable
Stress control	High dielectric constant (Hi-K) inserts or sleeves to shape the electric field, avoid high stress at shield cutbacks
Dielectric / insulation body	Silicone or elastomeric body (cold-shrinkable), void-free contracting to provide full insulation
Sealing / moisture protection	Use of mastic, grease, void filling compounds, tapes to ensure no air voids and prevent moisture ingress
Screen / shield continuity	Constant force springs / bonding springs / copper braid to connect shield to earth or ground
Creepage & clearance	Designed to meet the required creepage distance / clearance in indoor installations
Impulse / BIL / switching performance	The termination should satisfy the required impulse / switching overvoltage withstand as per system / standards
Operating / ambient temp	Typical installation and operating temperature range (e.g. 20 C to +50 C or similar)
Shelf life / storage	Many kits have a shelf life (often 23 years) if stored under appropriate conditions
Standards / compliance	Should meet medium voltage termination standards like IEC 60502-4, HD 629, or similar local standards

Reference to 3M Datasheets / Products

3Ms 92-EB series 11 kV three-core indoor terminations datasheet describes cold-shrink indoor terminations for 11 kV, 3-core cables. 3M Multimedia
The 3M QT-III cold shrink termination series brochures describe general features, kit contents (silicone termination bodies, breakout boots, rejacketing, shield braid, springs, sealing strips, tape etc.) and application across medium voltage ranges. 3M Multimedia+23M Multimedia+2