3M 11KV 3C*95SQMM OUTDOOR TERMINATION KIT

3M 11KV 3C*95SQMM OUTDOOR TERMINATION KIT Specification

Material
Cross Linked Polyolefin

Application
Electrical Fitting

Surface Treatment
Polished

Voltage
1.1 Volt (v)

Design
Standard

Features
Good quality

Color
Red

3M 11KV 3C*95SQMM OUTDOOR TERMINATION KIT Trade Information

Minimum Order Quantity
1 Piece

Payment Terms
Cash in Advance (CID)

Supply Ability
500 Pieces Per Month

Delivery Time
2 Days

Main Domestic Market
All India

About 3M 11KV 3C*95SQMM OUTDOOR TERMINATION KIT

3M 11 kV, 3C 95 sq mm Outdoor Termination Kit (i.e. for terminating a 3-core 95 mm cable) based on 3Ms medium voltage (MV) termination technology and typical supplier specs. If you need the data sheet or installation steps, I can provide those too.

What is it?

A termination kit is used to safely end (terminate) a high voltage cable (here 11 kV) and connect it to equipment (e.g. switchgear, transformer, junction box etc.). The kit provides insulation, stress control, shielding continuity, sealing from moisture, and a mechanical interface to the cable conductors.

In this case:

Voltage class: 11 kV (sometimes called 11 kV(e) in India)
Cable: 3 cores, each 95 mm cross section
Outdoor use
Typically for XLPE / polymeric insulated cables
May be heat-shrinkable or cold-shrink or hybrid type

Typical Components of the Kit

A kit for a 3C 95 sq mm 11 kV outdoor termination would typically include:

Component	Purpose
Main insulating body / termination shell	Provides the insulation and outer protection over the cable conductor end and stress control zone
Stress control (grading) tubes or layers	Manage electric field to avoid stress concentration at the cable-insulation interface
Breakout (trifurcating) boots or branches	Provide separation and insulation for the individual cores where they branch out from the main body
Shielding / screen connection parts (e.g. braid or tape)	To maintain the cable screen continuity and provide an earth/ground path
Mastic, sealing compound, tapes (silicone, adhesive, semi-conductive, insulation tapes)	To seal interfaces, fill voids, moisture barrier, bond between parts
Armour continuity or bonding parts (if cable is armoured)	To maintain mechanical/earth continuity over the armour if present
Re-jacketing tubes or outer insulation sleeve	To restore outer jacket over the termination area
Installation instructions, possibly a removable core (for cold-shrink types)	To guide correct assembly / shrinkage etc.

Depending on the design, the kit may be cold shrink, heat shrink, or partially integrated, with integrated mastic/compound or separate. 3M calls its cold shrink product lines QT-II and QT-III. 3M Multimedia+23M+2

Key Features / Technical Attributes

Some of the important properties and features you can expect from a quality 11 kV, 3C 95 sq mm termination kit:

Voltage insulation & stress control: designed to handle 11 kV operational voltage plus impulse (BIL) levels appropriate for that class.
Material: silicone rubber (for cold shrink) or cross-linked polyolefin / other insulating polymer for heat shrink type, with good tracking, erosion resistance, UV stability, hydrophobicity.
Void-free sealing: ensure no voids which could cause partial discharge / corona.
Constant radial pressure (in cold shrink types): to maintain sealing over long life.
Wide conductor size accommodation (some tolerance) so the same kit may suit a range (e.g. 95150 mm) depending on manufacturer tolerance.
Ease of installation: ideally no flame or high heat required (especially with cold shrink). Power and Cables+23M Multimedia+2
Shelf life / storage: e.g. many 3M cold shrink kits have a 3-year shelf life when stored between 40 C to +50 C. Power and Cables+1
Screen / earth / shield connections: via constant force springs or other methods for connecting to cable screen (wire or tape) without soldering. Power and Cables+1
Standards compliance: typically designed to meet IEC 60502 (or relevant local standards) for medium voltage terminations. Power and Cables+1
Mechanical protection / weather sealing: since its for outdoor application, it must resist moisture, UV, temperature extremes, pollution, insects etc.
Size / dimensions: the kit will have outer diameter ranges it can clamp over (depending on cable insulation outer diameter) and required length.