3M 11KV 3C*50SQMM INDOOR TERMINATION KIT

3M 11KV 3C*50SQMM INDOOR TERMINATION KIT Specification

Frequency
50-60 Hertz (HZ)

Features
Easy to use

Warranty
6 to 12 month

Material
Heat Shrinkable

Application
Electrical Fitting

Color
Red

3M 11KV 3C*50SQMM INDOOR TERMINATION KIT Trade Information

Minimum Order Quantity
1 Piece

Payment Terms
Cash in Advance (CID)

Supply Ability
500 Pieces Per Month

Delivery Time
2 Days

Main Domestic Market
All India

About 3M 11KV 3C*50SQMM INDOOR TERMINATION KIT

3M Indoor Termination Kit 3Core 11kV 50sqmm: This is listed on IndustryBuying as an indoor termination kit for 50 sq mm, 11 kV, 3-core cables.
(Note: Always confirm the variant, insulating range, shield type and kit contents with the seller before purchase.)

Typical Specification & Features

Based on 3Ms QT-II / QT-III / 92-EB / 92-EP series for 11 kV, 3-core indoor terminations, here are the expected features:

Parameter / Feature	Typical Value / Description
Voltage class / rating	Up to 11 kV (12 kV U class) 3M Multimedia+1
Cable core / configuration	3-core polymeric insulated cable (XLPE, EPR) with copper tape or wire screen (and possibly armour) Power and Cables+2Power and Cables+2
Conductor size / range	Kit designed to cover around 50 sq mm, typically within a broader range (e.g. 3595 sq mm) depending on the kits flexibility Power and Cables+2Power and Cables+2
Insulation outer diameter range	The kit will accommodate a certain range of diameters over the primary insulation (this needs to match the actual cable insulation OD)
Stress control	Integrated high-dielectric (Hi-K) stress control elements (tubes or sleeves) to manage field grading at the shield cutback
Insulation body	Silicone rubber (cold-shrink type) or elastomeric body that provides dielectric insulation and creepage performance
Sealing & moisture protection	Use of silicone grease / mastic, tapes (moisture sealing), and void-filling compounds to ensure no air gaps and maintain long term insulation integrity
Earth / shield continuity	Inclusion of constant-force springs or bonding springs for solderless earth (screen) connection Power and Cables+23M Multimedia+2
Breakout boots / trifurcating	Kits include cold shrink breakout boots for separating the three cores downstream of the main termination body Power and Cables+23M Multimedia+2
Re-jacketing tubes / sleeves	To restore jacket / outer covering where the original cable jacket is trimmed or removed
Installation method	Cold shrink method no heat/flame needed; installation by pulling / unwinding the internal core support to let the silicone body contract around the cable 3M Multimedia+2Power and Cables+2
Operating / ambient temperature	Installation 20 C to +50 C (typical) 3M Multimedia+2Power and Cables+2
Shelf life / storage	Usually up to 3 years if stored in 40 C to +50 C range 3M Multimedia+1
Standards / compliance	Designed to meet or exceed IEC 60502-4 and European standard CENELEC HD 629.1 for medium voltage terminations 3M Multimedia+1

What to Check / Verify Before Use

When selecting or specifying the kit, ensure:

Insulation outer diameter (OD) match the kits allowed OD range must include your actual cable insulation diameter.
Shield type compatibility tape shield, wire shield or combination; and whether armour is present.
Maximum lug / connector size allowed by the kit.
Trifurcation / breakout boot capacity ability to branch three cores with the kits breakout boots.
Clearance, creepage, mechanical supports in the indoor installation environment.
Correct installation tools & procedure are followed (cleaning, alignment, core removal, sealing).
Storage conditions and shelf life prior to installation.